Skip to content
SDN BHD
Tack Coat
Road Materials

Tack Coat

Rapid-setting bitumen emulsion that bonds asphalt layers together. No heating needed.

Supplied to
Selangor, Kuala Lumpur & Johor
Delivery
to site, by lorry

Description

Tack coat is a thin layer of bitumen emulsion sprayed between two pavement layers so they bond into one structure. It is used between a base course and a wearing course, and between an old surface and a new overlay.

Bitumen emulsion is made of tiny bitumen droplets suspended in water. Once sprayed, the water evaporates and leaves a thin, even bitumen film that glues the layers together. It needs no heating, gives off no solvent fumes and carries no fire risk, and rapid-setting grades let paving start soon after spraying.

Application rates depend on the surface and the project specification. Confirm the required product and quantity with our team.

Applications

  • Bonding new asphalt to a base course
  • Bonding an overlay to an old wearing course
  • Joints, edges and patches
  • Before premix paving
  • Resurfacing and milling reinstatement
Grades and typical use
TypeGradeTypical use
Rapid settingCRS-1, RS-1K (about 50% bitumen)Tack coat
Rapid settingRS-2K (about 60%)Tack coat, penetration macadam
Polymer modified, rapid settingCRS-1PTack coat
Other (BS 434)K1-40 (about 38%)Tack coat

Good practice

  • Spray a thin, uniform coat on a clean, dust-free surface
  • Too much emulsion can cause fat spots, bleeding and a slippery plane between layers
  • Too little emulsion leads to peeling and a weak bond
  • Pave once the emulsion has broken and set, following the project specification
Road Materials

Prime Coat

Slow-setting emulsion that seals and binds a granular base before the first asphalt layer.